The important factor about choosing the new material is to make completely positive that it is of the same thickness as the unique subfloor. The sides of the “H” are then nailed and screwed into the ground joists. Remember, the cross support of the “H” should be half beneath the sting of the present subfloor in order that the sting of the subfloor can be screwed into the brand new cross help. The sides of the H will each screw into the prevailing flooring joists. When it is accomplished this way, the sides of each the old subfloor and the new subfloor may be secured properly to the new cross support within the flooring. Using this methodology is mostly simpler to put in the cross help half underneath the present subfloor. Getting the cross assist to drop down into the hangers can be tricky due to the existing subfloor that is nonetheless on the joist.
The easiest method to begin removing the subfloor, is to make use of a large hole noticed or a jigsaw and minimize out from the hole in the flooring or a piece of the gentle spot within the ground. Once you locate where the joist are, then you can use the noticed to chop along the facet of the joist. As you’ll be able to see within the above photographs, there are ground joists beneath the floor. When eradicating the subfloor, you need to just be sure you don’t injury these joists. In another current … Read More